Connect with an FHOPE Specialist

DLTUS600 series - General Machining of Stainless Steel

Literal statement:
According to the melting of stainless steel and the ability to attach, so that the chip is easy to be adsorbed on the surface of the blade, broken ring cutting environment. After milling the stainless steel, the blade is sharp and can withstand the impact of the flute. The helix angle b can be increased from 20 ° to 45 ° (gn = 5 °), the tool durability is enhanced and the service life is at least 2 years. Since the positive angle g0e of the cutter increases from 11 ° to 27 ° or more, , So the end mill b ≤ 35 ° just right, but the b value can not be high, so as not to weaken the ability to cut teeth.

Features:
  • General processing of stainless steel (<280HB) such high production metals.
  • Good temperature resistance, good toughness, high strength, high hardness, high precision, to enhance the effectiveness of removal of bread crumbs.
DLTUS600 series - General Machining of Stainless Steel

Regular size:
Ordering code Outside Diameter
d
Flute Length
l
Overall Length
L
Shank Diameter
D
DLTUS600-4F-D010-L050 1.0  3.0  50 4
DLTUS600-4F-D015-L050 1.5  4.5  50 4
DLTUS600-4F-D020-L050 2.0  6.0  50 4
DLTUS600-4F-D025-L050 2.5  7.0  50 4
DLTUS600-4F-D030-L050 3.0  8.0  50 4
DLTUS600-4F-D035-L050 3.5  10.0  50 4
DLTUS600-4F-D040-L050 4.0  11.0  50 4
DLTUS600-4F-D050-L050 5.0  13.0  50 6
DLTUS600-4F-D060-L050 6.0  16.0  50 6
DLTUS600-4F-D070-L060 7.0  17.0  60 8
DLTUS600-4F-D080-L060 8.0  20.0  60 8
DLTUS600-4F-D090-L075 9.0  25.0  75 10
DLTUS600-4F-D100-L075 10.0  25.0  75 10
DLTUS600-4F-D110-L075 11.0  28.0  75 12
DLTUS600-4F-D120-L075 12.0  30.0  75 12
DLTUS600-4F-D140-L080 14.0  35.0  80 14
DLTUS600-4F-D160-L100 16.0  45.0  100 16
DLTUS600-4F-D180-L100 18.0  48.0  100 18
DLTUS600-4F-D200-L100 20.0  50.0  100 20

Tool material composition:
1. Physical Properties:
a. Hardness greater than or equal to 92.8 HRA;
b. Density greater than or equal to 14.2g/cm³;
c. TRS greater than or equal to 4200 N/mm²;
d. Free of ETA phase condition;
e. No contamination by other materials;
f. Porosity = A00/ B00 / C00 ;
g. Uniform and consistent grain size. No grain size can be larger than specified.
h. Chromium carbide grain growth inhibitor only.
2. All the tools of production, coatings are used in Germany, Switzerland,  processing equipment;
 
Coating:
Universal High Performance Coating AlCrSiN
Characteristics and Function
1. The spiral angle is special and the flute geometry is optimized to improve the metal removal rate in stainless steel and superalloy.
2. To maximize productivity.

Operation parameter:
DLTUS600 S4   For Stainless Steels-Side Milling
Grades Tool shape
S4
Workpiece
Material
Cutting Depth 
(mm)
VC m/min Tool Diameter
(mm)
1 2 4 6 8 10 12 16 20
DLTUS600 Square
Corner radius
Stainless steel ap≤1D 100
(80-120)
Speed
min-1)     
25000 15900 7960 5300 3980 3180 2650 1990 1590
ae≤0.1D   Feed Speed
mm/min)
700 635 700 680 730 660 600 490 460

DLTUS600 series - General Machining of Stainless Steel
Prefer to more operation parameters, you could free download the attachment.

Attention:
  1. The installation of the blade positioning surface and fastening parts do not allow debris adhesion, should be carefully checked that the damage after the installation of the blade and then install the blade.
  2. Only use the supplied special wrench to clamp the blade.
  3. Refer to the instruction manual and sample of the tool product for use within the recommended range.
  4. Operation must pay attention to safety, the use of protective gloves, pay attention to protect the eyes.

Product Literature

Categories

Products

DLTTK600 series-End mill for thread

DLTUA600 series - High Speed Machining